Ret (Equipment Type); Pnm (Part Number); Frw (Legacy Firmware Information) - Comtech EF Data DT-4500 Series Installation And Operation Manual

DT-4500 Series C- and Ku-Band Down Converters
Serial Interface Operation
8.7.2.18

RET (Equipment Type)

Use RET to query the read-only model number and software revision of the unit.
Description
Return Equipment Type:
Confirmation:
8.7.2.19

PNM (Part Number)

Use PNM to query the unit's read-only part number information.
Description
Return Part Number:
Confirmation:
8.7.2.20

FRW (Legacy Firmware Information)

The FRW legacy query no longer provides information about the unit's firmware
type. It provide backwards compatibility with the initially released chassis
monitor and control software applications. Use FRM to query the current
production unit's firmware information.
Description
Return Firmware Information:
Confirmation:
Details
<DEV/RET_{cr}
>DEV/RET_xxxxxxxxxx yyyyyyy{cr}{lf}] where:
xxxxxxxxxx = Model Number
yyyyyyy = Software Version
Details
<DEV/PNM_{cr}
>DEV/PNM_xx...xx{cr}{lf}] where:
xx...xx = up to 96 bytes of part number information
Details
<DEV/FRW_{cr}
>DEV/FRW_{cr}
BULK= FWnnnn-nr Ver=x.xx{cr}
M&C = FWnnnn-nr Ver=x.xx{cr}
FPGA= FWnnnn-nr Ver=x.xx{cr}{lf}]
where: nnnn-n firmware number
r firmware revision letter
x.xx firmware version number
Note: The BULK, M&C, and FPGA firmware have different numbers,
revisions, and versions.
8–17
MN/DT4500.IOM
Revision 2