Comtech EF Data DT-4500 Series Installation And Operation Manual page 105

DT-4500 Series C- and Ku-Band Down Converters
Front Panel Operation
View or edit the SNMP Trap Community string. To edit, use the   keys to select
a character, and then use the  keys to change that character. Press ENTER.
(REMOTE:) ETHERNETSNMPTRAPS
Use the   keys to select TRAPIP1, TRAPIP2, or VERSION. Press ENTER.
(REMOTE:) ETHERNETSNMPTRAPSTRAPIP1/TRAPIP2
If both Trap IP Addresses are 000.000.000.000, it means that Traps are
disabled.
Typical for both submenus: View or edit the Trap Destination IP Address. To
edit, use the   keys to select a digit, and then use the  keys to change
that digit. Press ENTER.
(REMOTE:) ETHERNETSNMPTRAPSVERSION
Use the  keys to set the trap version as SNMPv1 or SNMPv2. Press ENTER.
TRAPIP1 TRAPIP2 VERSION
TRAP IP ADDRESS #1:
000.000.000.000
TRAP IP ADDRESS #2:
000.000.000.000
Trap Version:
SNMPv1 SNMPv2
6–13
MN/DT4500.IOM
Revision 2