Unit Connectors; Figure 4-5. Dt-4500 Series Rear And Front Panels; Figure 4-6. Dt-4500 Series Rear Panel - Initially Released Chassis (Obsolete) - Comtech EF Data DT-4500 Series Installation And Operation Manual

DT-4500 Series C- and Ku-Band Down Converters
Front and Rear Panel Connectors

4.2 Unit Connectors

External cables are attached to connectors provided on the rear and front panels
of the unit (Figure 4-5).
The DT-4500 chassis, as initially released (Figure 4-6), does not provide
an 'Ethernet' RJ-45 port. Ethernet interface operation is not available on
these legacy products.
(TOP) Rear Panel with Optional -48VDC Unit Power Interface
(CENTER) Rear Panel with Standard AC Unit (with IOM)
Figure 4-5. DT-4500 Series Rear and Front Panels (DT-4503 Current
Figure 4-6. DT-4500 Series Rear Panel – Initially Released Chassis
(BOTTOM) Front Panel
Production Chassis shown)
(OBSOLETE) (with RSM)
4–7
MN/DT4500.IOM
Revision 2