Overview - Cabling Connection Types - Comtech EF Data DT-4500 Series Installation And Operation Manual

Chapter 4. FRONT
PANEL CONNECTORS
4.1 Overview – Cabling Connection Types
Comtech EF Data's DT-4500 Series C- and Ku-Band Down Converters use a
number of different cables. Each cable type is typically dedicated to a specific
mode of operation.
1) Not all of these operational interface types may be available.
2) The European EMC Directive (EN55022, EN50082-1) requires using
properly shielded cables for DATA I/O. These cables must be
double-shielded from end-to-end, ensuring a continuous ground
shield.
AND
4–1
REAR