Ap Management Settings; Management Setup - TRENDnet TEW-740APBO User Manual

TRENDnet User's Guide

AP Management Settings

Management Setup

System > Management
These settings will allow you to configure the AP system information, administrator
password, management access methods, external logging, and automatic reboot
schedule.
1. Log into your access point management page (see
management page" on page 28).
2. Click System and click on Management. Review the settings and click Save to apply
the changes.
System Information

System Name – Specifies the device or hostname of the AP for easily
identifying the device and network management purposes.

Description – Specifies a brief description of the device for easily identifying
the device and network management purposes.

Location – Specifies the location of the device relative to the network for easily
identify the device and network management purposes.
© Copyright 2017 TRENDnet. All Rights Reserved.
"Access your access point
Administrator Password

New/Check Admin Password – To change the default administrator password,
enter the new password in the field provide and again in the check field to
confirm the password change.
Login Methods

HTTP – The standard unsecured web GUI method is enabled by default. Check
the box to enable or disable management access to the device via http web GUI
access. You can also check the default port used for management access.

HTTPS – This type of management access is also through the web GUI but
secured using SSL (Secure Socket Layer) encryption. The default port may also
be changed. Additionally, you can upload your own SSL certificate under Utility
> Profile Settin.

Telnet – This type of unsecured management access is through the CLI
(Command Line Interface) through the AP IP address and has been disabled by
default for security purposes. The default port may also be changed.

SSH – This type of secured and encrypted management access is also through
the CLI (Command Line Interface) through the AP IP address. The default port
may also be changed. For additional security, the Host Key Footprint may also
be changed by clicking Generate Key.
TEW-740APBO / TEW-740APBO2K
29