Moulinex I-COMPANION XL Manual page 68

Your i-Companion xl appliance can operate in
'connected' mode, and also in 'unconnected' mode.
It also has two operating modes: automatic program
mode and manual mode.
EN EN
• Automatic program mode:
the speed, cooking temperature and cooking time
are pre-programed to make soups, stews, steamed
dishes and pastries automatically.
• Manual mode:
you can personalise the settings for speed, cooking
temperature and cooking time as you wish.
Use with or without the lid
Temperature from Temperature from
30°C to 130°C 135°C to 150°C
F1 F2
F1 F2
F3 F4
F5
F3 F4
- When you have selected a temperature between
135°C and 150°C, you must use your appliance
without the lid. If the lid is positioned on the
bowl, a lock will be displayed on the LCD screen,
prompting you to unlock it.
- Once you have added the food items, stir them
using the spatula and regularly repeat the
operation to prevent the formation of stains on the
bottom of the bowl. (See "Cleaning" paragraph).
- If you choose to use the appliance with its lid
in place, the maximum cooking temperature shall
then be 130°C.
YOUR APPLIANCE IS EQUIPPED WITH SAFETY-
LOCKING LID
The lid is secure each time the appliance starts.
This security feature prevents the lid from opening
when preparing a recipe
(See Fig.17). Do not attempt
This security lock
to force the lid when it is locked.
is released each time that the appliance stops. If
you have selected a temperature greater than or
equal to 50°C and a speed greater than or equal to
5, a countdown of 10 seconds then appears on the
control-panel 's LCD display. . It will only
(See Fig.18)
be possible to open it at the end of the countdown.
FITTING THE BOWL, ACCESSORIES AND LID
ASSEMBLY
• Before using your appliance for the first time, clean
all the parts (D, E, F, G) in warm soapy water,
except for the motor unit (A). Your bowl (D) has
a removable drive (D3) to make cleaning easier.
127
• Make sure that all the packaging has been removed
before use, especially the protection between the
bowl (D) and the motor unit (A).
• Place the seal (E4) on the seal carrier (E3) (see
Fig. 1) and clip the assembly on the lid (E2) (see
Fig 2).
• Position the gasket (D4) on the shared drive
(D3). Lock the assembly to the bottom of the
bowl with the locking ring (D5) (see Fig. 3).
If you use the cooking mode without the lid,
position the seal (D4) on the detachable spindle
(D3). Lock the entire appliance to the bottom of
the bowl with the locking ring (D5) (see Fig. 3).
• Position the chosen accessory in the bowl:
- the accessories (F1, F2, F3, or F4) on the shared
drive at the bottom of the bowl (see Fig. 4.1),
- for steam cooking, the steam basket (F5) inside
the bowl, (see Fig. 4.3 ), taking care to first fill
the 0.7l basin with a liquid (water, sauce, etc.)
(see Fig. 4.2 ).
• Add the ingredients to the inside of the bowl or
steam basket.
• Position the lid on the bowl (D) by aligning the
two triangles (see Fig. 5), lock the lid without
pressing by turning it in the direction of the arrow
(see Fig. 6).
Position the steam regulator cap (E1) on the lid.
There are 2 possible positions (see Fig. 7):
The low setting allows a maximum
amount of condensation to be re-
leased and therefore it is recom-
mended to prepare dishes and sauces
with a better consistency
(risotto, creamy puddings, sauces, etc.).
The high setting allows a maximum
amount of heat and steam to build
up in the bowl for all types of steam
cooking (soups, etc.).
This setting also prevents splashing during
mixing.
• Position the bowl (D) on the motor unit (A)
until you hear a "click" (See Fig. 8).
• The appliance only starts up if the bowl and
the lid are correctly positioned and locked on
the motor unit.
In the event of incorrect positioning of the
bowl or incorrect locking of the lid (See
Fig. 10.1 and 10.2), the logo starts to
flash when a function is activated.
127
Selecting custom settings:
Selecting the motor speed.
2 intermittent speeds (Speed 1 &
2) and 10 continuous progressive
speeds (Speed 3 to 12)
Max intermittent speed (S13).
Selecting cooking speed.
From 30° to 150°C.
Heating indicator light: lights up
when cooking starts and switches
off when the temperature inside
the bowl falls to below 50°C.
Selecting operating time.
From 5 sec to 2 hours.
1st connection pairing
Tips for use:
Your appliance is fitted with a microprocessor that controls and analyses its stability. In the event
of instability, the motor rotation speed will be automatically reduced, if this instability continues,
the motor will be stopped and "STOP" will be displayed on the screen.
• Check that the quantity of ingredients is not too large and that the speed used is the correct one.
• Check that you are using the recommended accessory.
• Then restart your appliance normally.
128
Increase speed, cooking
temperature and duration.
Decrease speed, cooking
temperature and duration.
This button has 3 functions:
- 'Validation' of your
automatic program
selection or the settings
you have chosen in
manual mode (speed,
cooking temperature,
time).
- 'Pause' when operating,
once the appliance has
been started.
- 'Reset' of the appliance
settings, selected by
pressing and holding for
2 seconds.
- 'Validation of step' in
step-by step recipes.
128
EN EN