What You Have To Do First - Agilent Technologies 1200 Infinity Series User Manual

13
LAN Configuration

What You Have to Do First

What You Have to Do First

The module has an on-board LAN communication interface.
1 Note the MAC (Media Access Control) address for further reference. The
2 Connect the instrument's LAN interface (see
224
MAC or hardware address of the LAN interfaces is a world wide unique
identifier. No other network device will have the same hardware address.
The MAC address can be found on a label at the rear of the module
underneath the configuration switch (see
Figure 55 MAC-Label
the PC network card using a crossover network cable (point-to-point) or
•
a hub or switch using a standard LAN cable.
•
Figure 56 Location of LAN interfaces and MAC label
Figure 56 on page 224).
Figure 56
Agilent 1200 Infinity Series DAD User Manual
on page 224) to