3
LAN Configuration
What You Have to Do First
What You Have to Do First
The ELSD has an on-board LAN communication interface.
1 Note the MAC (Media Access Control) address for further reference. The MAC
2 Connect the instrument's LAN interface to
Agilent InfinityLab ELSD User Manual
or hardware address of the LAN interface is a worldwide unique identifier. No
other network device will have the same hardware address. The MAC address
can be found at detector start up (see
Panel"
on page 30).
•
the PC network card using a crossover network cable (point-to-point)
or
•
a hub switch using a standard LAN cable.
"Configuration Using Instrument Front
28