Removing And Installing Components; Recommended Tools; Removing The Atg Handle; Installing The Atg Handle - Dell Latitude E643 Owner's Manual

Removing and Installing Components

This section provides detailed information on how to remove or install the components from your computer.

Recommended Tools

The procedures in this document may require the following tools:
• Small flat-blade screwdriver
• Phillips screwdriver
• Small plastic scribe

Removing the ATG Handle

1. Follow the procedures in
2. Remove the screws that secure the ATG handle to the computer.
3. Remove the right ATG port cover.

Installing the ATG Handle

1. Secure the ATG handle by tightening it with the screws.
2. Follow the procedures in
Before Working Inside Your Computer .
After Working Inside Your Computer .
2
11