Replacing The Fuses - Kubota U17-3a Operating Instructions Manual

Replacing the fuses

Defective fuses may only be replaced with fuses of the same type and same rating.
The bypassing of fuses, for example with a wire, is not allowed.
If the malfunction cannot be remedied by replacing the fuse, or if the fuse blows again when starting,
contact skilled personnel.
The main fuses (page 95) of the excavator are situated next to the battery.
Open the engine compartment cover (page 114).
Remove the cover from the fuse box (1).
Remove the defective fuse from the fuse box and replace it.
Observe the following fuse box layout!
Check the component function after replacing the fuse. If the
fault still persists, contact your KUBOTA specialist dealer.
After finishing the work, install the cover on the fuse box and
close the engine compartment cover.
94
1
Operation
W9232-8135-6
12/2015