Kubota U17-3a Operating Instructions Manual page 43

Assembly and functions
Description of the components of the right control console
1. Right control lever
The right control lever is used to move the boom and the buck-
et.
The figure, in conjunction with the following table, shows the
functions of the right control lever.
Position of control lever Movement
1
2
3
4
2. Horn switch
Depressing the horn switch activates the horn.
3. Travel speed button
The travel speed button switches the travel speed mode on and off.
4. Dozer control lever
Depending on the position of the dozer/extendable track width selector lever (page 46), the dozer control lever
is used to raise and lower the dozer or to narrow and widen the track width.
5. Throttle lever
Using the throttle lever, the operator can adjust the engine speed in an infinitely variable manner.
6. Starter switch
The starter switch serves as the master switch for the entire machine and as the switch for pre-glowing and
starting the engine.
7. Rotary beacon button (accessory)
The rotary beacon (accessory) is switched on with this button.
8. Working light button
Switches the working lights on or off.
9. Display and control unit
The functions of the display and control unit are described in the "Display and control unit - description" section
(page 44).
10. Wrist rest
The wrist rest allows fatigue-free operation of the control lever.
W9232-8135-6
12/2015
Lower boom
Raise boom
Bucket crowd
Bucket dump
43