Accessories; Kubota Rotary Beacon; Kubota Pipe Safety Valve - Kubota U17-3a Operating Instructions Manual

Accessories

Accessories
The accessories approved for this excavator by the respective countries are described in the following segments.
For further accessories, please contact your KUBOTA dealer or authorised retailer.
Accessories from other manufacturers may only be fitted after prior written approval from KUBOTA.
STOP
Also see the "Approved use" section (page 16).

KUBOTA Rotary beacon

An optional rotary beacon (1) is available as an accessory. The bea-
con is mounted with a clip-on pedestal (2) at the rear end of the can-
opy.
The rotary beacon is switched on and off with the rotary beacon
switch. See the "Right control console" section (page 42) for details.

KUBOTA pipe safety valve

A pipe safety valve prevents oil from being lost suddenly in the at-
tached hydraulic cylinder in the event a pipe or a hose bursts in the
hydraulic circuit. This prevents, for example, the load or attachment
from suddenly falling or the machine from tipping precariously when
operating the dozer.
A pipe safety valve is located on the hydraulic port of the boom cyl-
inder (2) and arm cylinder (1), respectively.
Additionally, a pipe safety valve can be mounted onto the hydraulic
port of the dozer cylinder (3).
To equip the excavator, contact your KUBOTA dealer.
The pipe safety valve is adjusted in the factory on the particular ex-
cavator.
Manipulating the pipe safety valve will void the warranty.
Any manipulation can result in substantial personal in-
STOP
juries, even death, and is therefore strictly prohibited.
The manipulation and repair of the pipe safety valves is prohibited. They may only be replaced by your KUBOTA
dealer as a kit.
W9232-8135-6
12/2015
2
1
1
2 3
147