Replacing The Fuses; Fuse Layout Of The Fuse Box - Kubota U17-3a Operating Instructions Manual

Operation

Replacing the fuses

Defective fuses may only be replaced with fuses of the same type and same rating.
The bypassing of fuses, for example by a wire, is not allowed.
If the malfunction can not be remedied by replacing
the fuse, or if the fuse blows again when starting,
contact skilled personnel.

Open the engine compartment cover (page 74).

Remove the defective fuse from the fuse box (1) and re-
place it.

The fuse layout is shown in the next section.

Replace the corresponding defective main fuse or alternator
circuit fuse in the fuse holder (2).

Fuse layout of the fuse box

No. Capacity
(1) 5 A
(2) 5 A
(3) 15 A
(4) 10 A
(5) 5 A
(6) 10 A
(7) 15 A
(8) 10 A
(9) 5 A
(10) 10 A
(11) 5 A, 10 A, 15 A
Circuit
Preheating system
Main fuse for the anti-theft system
Charging socket
Fuse for the anti-theft system
Automatic starter release
Rotary beacon
Working light
Horn
Control lever lock, speed switch
Alternator, fuel pump, indicators
Spare fuses
73