CHANGING THE BUCKET
To avoid personal injury:
A When the coupling pins are removed
or installed, chips may come off.
Always use gloves, goggles and a
helmet.
A When the change of the equipment
must be performed with the engine
running, always work as a 2-person
team.
One person sits in the operator's seat
and the other works on the machine.
A Do not use your fingers to center the
holes, since they may be injured or
even cut in case of sudden or
uncontrolled movements.
A Read the manual of the attachment to
do a correct operation safely when
other
attachments
instead of Kubota specified bucket.
OTHER ADJUSTMENTS AND REPLACEMENTS
are
installed
FUSES
BReplacing Fuses
1. Remove the cover of the fuse box.
2. Replace the burnt out fuse with a fuse
having the same capacity.
BFuse Capacities and Circuits
(1) Fuse box
No.
Capacity
1
15A
2
10A
3
5A
4
5A
15A, 10A, 5A Spare fuses
BSlow Blow Fuse
Slow blow fuse is provided to protect the
electrical circuits. If the fusible link is blown,
check the electrical circuits for problems and
then replace with a new compatible slow blow
fuse.
(1) Slow blow fuse
Circuit
Fuel cut solenoid
Working lamp, Horn
Hour meter, Fuel pump,
Control lamp, Regulator
Timer relay
53