Fuel Filter Cartridge - Change - Kubota U17-3a Operating Instructions Manual

Maintenance
Remove the drain plug (2) and let the oil drain out completely.
Install the drain plug with a new sealing ring on it.
Unscrew the filler plug (1).
Fill oil as specified in the "Recommended lubricants" section
(page 112). The oil level is the lower edge of the thread.
Capacity:
Provide filler plug with new oil ring and screw in.
Perform the same service on the second drive unit.
Dispose of cleaning cloths and old oil in accordance with applicable environmental protection regu-
lations.

Fuel filter cartridge - change

Open the engine compartment cover (page 114).
Place a cleaning cloth under the fuel filter to prevent
fuel from spilling onto the ground.
Turn the shutoff-valve (1) to the "CLOSED" position.
Remove the fuel filter (2).
Wet the rubber seal of the new filter with fuel.
Install a new filter and tighten it by hand.
Set the shutoff-valve to the "OPEN" position.
Bleed the fuel system (page 93).
Check the fuel filter for leaks.
Close the engine compartment cover.
Dispose of cleaning cloths and the old filter element in accordance with applicable environmental pro-
tection regulations.
W9232-8135-6
12/2015
approx. 0.25 l
1
2
2
1
129