Skilled Personnel Maintenance Chart - Kubota U17-3a Operating Instructions Manual

Skilled personnel maintenance chart

Carry out for each maintenance of the "Pre-operational services" (page 56).
Servicing
V-belt
Pilot valve linkage
Engine oil and oil filter
Drive unit oil
Fuel filter
Return filter
Hydraulic oil and
suction filter
In-line filter
Fuel injection -
fuel injector pressure
Oil in idler and track roller
Alternator and starter motor
Fuel injection pump
Safety inspection
Coolant hoses and hose
clamps
Fuel lines and air intake hos-
es
Coolant
Hydraulic hoses
* The servicing identified with
have been reached.
1.) If there is a lot of dust, the air filters and the fresh air filters must be cleaned and/or replaced more often.
2.) When using a breaker over 20 %
When using a breaker over 40 %
When using a breaker over 60 %
When using a breaker over 80 %
3.) Earlier if necessary.
4.) At least annually.
110
Tasks
50 100 150 200 250 300 350 400 450 500
Setting
Grease
Change
3.) Change
Change
2.) Change
Change
2.)
Change
Check
Change
Check
Check
4.) Check
Change
Change
Change
Change
must be carried out once the specified hours of operation after initial commissioning
every 800 h.
every 400 h.
every 300 h.
every 200 h.
Hours of operation indicator *
Please contact your KUBOTA dealer.
Please contact your KUBOTA dealer.
Please contact your KUBOTA dealer.
Please contact your KUBOTA dealer.
Please contact your KUBOTA dealer.
Please contact your KUBOTA dealer.
Please contact your KUBOTA dealer.
Maintenance
Mainte-
nance in- Page
tervals
250 h 126
250 h 126
500 h 127
500 h 128
500 h 129
500 h 130
1000 h 132
1000 h 133
1500 h --
2000 h --
2000 h --
3000 h --
Annually 138
Every
--
2 years
Every
--
2 years
Every
134
2 years
Every
--
2 years
W9232-8135-6
12/2015