Changing The Bucket; Fuses; Replacing Fuses; Fuse Capacities And Circuits - Kubota u25 Operator's Manual

56 OTHER ADJUSTMENTS AND REPLACEMENTS

CHANGING THE BUCKET

To avoid personal injury:
A When the coupling pins are removed or
installed, chips may come off. Always use
gloves, goggles and a helmet.
A When the change of the equipment must be
performed with the engine running, always
work as a 2-person team.
One person sits in the operator's seat and the
other works on the machine.
A Do not use your fingers to center the holes,
since they may be injured or even cut in case of
sudden or uncontrolled movements.
A Read the manual of the attachment to do a
correct operation
attachments are installed instead of Kubota
specified bucket.

FUSES

BReplacing Fuses
1. Remove the cover of the fuse box.
2. Replace the burnt out fuse with a fuse having the same
capacity.
BFuse Capacities and Circuits
(1) Fuse box
safely when other
5A Meter (+B)
20A Work lamp
5A Room lamp
5A ECU (+B)
10A Horn
15A Auxiliary 1
15A Auxiliary 2
15A Electrical outlet
BSlow Blow Fuse
Slow blow fuse is provided to protect the electrical circuits.
If the fusible link is blown, check the electrical circuits for
trouble and then replace with a new compatible slow blow
fuse.
(1) Slow blow fuse (60A)
(2) Slow blow fuse (50A)
5A Starter
30A Engine stop
5A Fuel pump
10A ECU (AC)
5A Relay
10A Alternator
5A Lever lock
5A Horn SW