Table of Contents
Advertisement
4.
Pull out the red key.
5.
The insert key indicator blinks.
6.
Insert black key into the starter switch.
Do not turn the key at this point. If the key is in the RUN
position, turn it back to the STOP position.
7.
After a short moment, the pull out key indicator blinks. This
points out the fact that the black key has been registered for
this vehicle.
8.
Turn key into RUN position to complete the registration process.
9.
One after the other, insert all registered black keys into the starter switch and check whether the engine can
be started using these keys.
If a registered black key is lost, the other black keys must be re-registered. This procedure locks the
lost or stolen black key, which can no longer be used to start the engine.
100
Operation
W9232-8135-6
12/2015
Advertisement
Table of Contents
Troubleshooting
