Fuel level - check
The fuel gauge (1) indicates the relative amount of fuel
in the tank. The less fuel that is left in the fuel tank, the
lower the needle of the gauge.
Turn the starter switch to the RUN position.
Check fuel situation by looking at the fuel gauge on the display
and control unit.
Refuel excavator if there is too little fuel left (page 93).
Ensure that the fuel tank is not running on empty. Otherwise, air will get into the fuel system. The fuel
system must then be bled.
Electrical instrumentation - check
Check the function of the working light (page 88).
Check the function of the rotary beacon (accessories) (page 88).
Check all accessible electric cables, connectors and connections for condition and tightness.
Repair or replace damaged parts.
Check the fuse box and fuse holders for oxidation and dirt, clean if necessary.
62
Operation
W9232-8135-6
12/2015