In-Line Filter - Change - Kubota U17-3a Operating Instructions Manual

Maintenance

In-line filter - change

Pay attention to utmost cleanliness when servicing the
hydraulic system.
The replacement procedures are explained with the
LH control lever as an example; the RH control lever fil-
ter replacement should be performed in the same
manner.
Put cleaning cloths in the working area under the control con-
sole.
Depressurise hydraulic system (page 87).
Raise the left control console (1).
Remove the lower trim panels.
Remove the hydraulic line (white).
Unscrew the in-line filter (2).
Screw in a new filter.
Reconnect the hydraulic line.
Reinstall the trim panels.
Change the RH control lever in-line filter.
Dispose of cleaning cloths and the old filter element in accordance with applicable environmental pro-
tection regulations.
W9232-8135-6
12/2015
133