Security Mode - NEC DT730 User Manual

SECURITY MODE

DT730 Series has the Security (
prevents information leakage from terminal. While the
terminal is locked, Security Lamp lights up.
Security lock will be released.
Please input a password.
BK
• TO LOCK THE TELEPHONE
Before placing DT700 Series in Security mode, you can
set a password. For details on the password setting,
see TO CHANGE PASSWORD
Setup.
Press (Security) key on DT730 Series. The
followign message is displayed on LCD.
Security Lock?
) key which
Security Lamp lights up.
Press Security Key.
Cancel OK
in chapter 3 Terminal
Cancel OK
Press (Enter) or OK soft key to place DT700
Series in Security mode.
When DT730 Series is placed in Security mode,
Security Lamp lights red and the screen saver will
be activated.
• TO UNLOCK THE TELEPHONE
Display the Password Entry screen by either of the
following operations.
• Press any key while the screen server is
activated.
• Press
is activated.
Security lock will be released.
Please input a password.
BK
Enter the password and then press
OK soft key. Security Lamp is extinguished and
Security Mode is canceled.
92
(Security) while the screen server
Cancel OK
(Enter) or