Call Forwarding - Don't Answer - NEC Dterm Series i User Manual

Call Forwarding – Don't Answer
To set
Press Speaker. Receive dial tone.
If setting for another station, press
Press FWD-NA or dial "Call Forwarding – Don't Answer" access code. Receive special dial tone.
Dial destination station or external telephone number. Receive service set tone.
FWD-NA LED lights (at your station or at the D
Press Speaker. Call Forwarding – Don't Answer is set.
Using the Soft Key
Press FDN Soft Key. Receive special dial tone.
Dial destination; wait for service set tone.
"FORWARD SET" is displayed; Call Forwarding – Don't Answer is set.
term
To verify (with D
If verifying for another station, press MULTILINE APPEARANCE while idle.
Press FWD-NA.
Display indicates the station number calls are forwarded to.
Note 1: If recipient station is a D
Note 2: Call Forwarding for Busy Line and Don't Answer may be combined depending upon system programming.
Note 3: With Soft Key operation, FDB flashes on the display.
MULTILINE APPEARANCE
4D/8D/16D/16LD/32D)
term
4D/8D/16D/16LD/32D, LCD displays:
.
term
of the multiline station you are setting).
– 62 –
Forwarding
FORWARD SET
4:26 PM TUE 13 APR 2004
FORWARD SET
4:26 PM TUE 13 APR 2004
MIC
Forwarding
FORWARD
4:26 PM TUE 13 APR 2004
station
2000
>>>
station
2000