Guided Setup
Adjust the Angle of the Tilt Leg
To adjust the tilt level of the ITK-32TCGS-1:
The height can be adjusted by moving the legs, which are attached to
1.
the bottom of the terminal.
Turn the phone over (key side down).
2.
Adjust the legs to the desired height (upward to raise the height and
3.
downward to lower the height).
Connect Cables
Please follow the diagram to install your phone. Once plugged in, the phone
automatically downloads its configuration and starts to work. The voicemail box
is functional with a default greeting.
Connect an Ethernet cable to the LAN port on the phone and connect
1.
the other end to your network. (Fig. A)
Insert the RJ-9 handset connector into the "Handset" port on
2.
the back of the phone. (Fig. B)
A.
B.
3