Using The Web User Interface - R&S NRP Series User Manual

®
R&S NRPxxS(N)
8. Check if the update was successful. The firmware version in the "Identification"
field must match the version you selected in the "Firmware" field.
Troubleshooting
You do not find the sensor in the list of sensors provided by Firmware Update for NRP
Family.
The driver assigned to the sensor is the legacy driver.
► Install a recent VISA software.
The power sensor is highlighted by a yellow exclamation mark in the Windows device
manager.
Windows tries in vain to find a USB driver for the power sensor.
► Install a recent VISA software.
Further information:
●
Chapter 12.3, "Problems during a firmware

7.2.2 Using the web user interface

1. Connect the power sensor to the computer as described in
puter",
2. Open the web user interface as described in
interface",
3. In the navigation pane, select "System".
4. Click "Firmware Update".
5. In the "Firmware Update" dialog, click "Select RSU file".
6. In the file browser, select the *.rsu file for upload.
The selected *.rsu is displayed, for example NRPxSN_02.30.21062301.rsu.
User Manual 1177.5079.02 ─ 15
on page 18.
on page 34.
Firmware update
Updating the firmware
update", on page 171
Chapter 3.7.1, "Com-
Chapter 5.2, "Browser-based user
59