R&S NRP Series User Manual page 156

®
R&S NRPxxS(N)
Bit
no.
3
4
5
6
7
Further information:
●
See
●
Set and read the service request enable register using *SRE.
User Manual 1177.5079.02 ─ 15
Short description
Questionable status register
summary
MAV
Message available
ESB
Standard event status register
summary
RQS/MSS
Master status summary
Operation status register sum-
mary
Figure 11-1.
Bit is set if
An EVENt bit is set in the QUEStionable status register and
the associated ENABLe bit is set to 1. A set bit denotes a ques-
tionable device status which can be specified in greater detail
by querying the questionable status register.
Chapter 11.2.3, "Questionable status
A readable message is in the message queue. This bit can be
used to automate reading of data from the sensor into the con-
troller.
One of the bits in the standard event status register is set and
enabled in the event status enable register. Setting this bit
denotes a serious error which can be specified in greater detail
by querying the standard event status register.
Chapter 11.2.4, "Standard event status and enable register
(ESR, ESE)", on page 161.
The sensor triggers a service request, which happens if one of
the other bits of this register is set together with its enable bit
in the service request enable register (SRE).
An EVENt bit is set in the operation status register and the
associated ENABLe bit is set to 1. A set bit denotes that an
action is being performed by the sensor. Information on the
type of action can be obtained by querying the operation sta-
tus register.
Chapter 11.2.5, "Operation status
Remote control basics
Status reporting system
register", on page 158.
register", on page 162.
156