®
R&S
NRPxxS(N)
6 Browser-Based User Interface
The web user interface is an alternative way to operate an R&S NRPxxSN LAN power
sensor.
This chapter provides a description of the parameters used for setting a power mea-
surement with the web user interface.
For a detailed description of how to connect the sensor to a device and start the web
user interface, refer to
6.1 Main Dialog of the Web User Interface
Figure 6-1: Explanation of the web user interface
1 = Title bar
2 = Common settings, see
3 = Parameters pane
4 = Result pane
5 = Navigation pane - "Measurements", see
6 = Navigation pane - "Settings", see
The title bar shows the following information:
●
Hostname, see also
●
System status, see also
The parameters pane displays the content selected in the navigation pane.
The result pane displays the measurement result for the selected measurement mode.
It can display only a value or a graph, depending on the selected measurement mode.
User Manual 1177.5079.02 ─ 10
Chapter 5.2, "Browser-Based User
Chapter 6.3, "Common
Settings",
Chapter 6.4, "Measurement
Chapter 6.5,
"Settings",
Chapter 3.5.2.3, "Using
Chapter 4.4, "Status
Browser-Based User Interface
Main Dialog of the Web User Interface
Interface",
on page 30.
on page 43
Modes",
on page 44
on page 48
Hostnames",
on page 20.
LED",
on page 25.
41