Querying Measurement Results - R&S NRP Series User Manual

®
R&S NRPxxS(N)
–
–
–
The option line therefore reads:
# [HZ | KHZ | MHZ | GHZ] U [MA | DB | RI] [R 50].
●
Measurement frequencies
The measurement frequencies are listed in ascending order and are specified as
follows:
f
where f
that is forwarded as follows:
–
–
●
Comments
Any line starting with an exclamation mark (!) is interpreted as a comment line.

9.9 Querying measurement results

After the measurement, you can query the measurement results with a command from
the FETCh subsystem.
Remote commands:
FETCh<Sensor>:ARRay[:POWer][:AVG]?
FETCh<Sensor>[:SCALar][:POWer][:AVG]?
FETCh<Sensor>[:SCALar][:POWer]:BURSt?
FETCh<Sensor>[:SCALar][:POWer]:TSLot?
FETCh<Sensor>:ARRay[:POWer][:AVG]?
Queries the last valid measurement result of a measurement with enabled data buffer
mode.
To configure the measurand, use
ated.
Usage:
User Manual 1177.5079.02 ─ 15
<parameter>
U must be specified for uncertainty data files. If a parameter is not specified, S
is implicitly assumed and as a result an error message is triggered.
<format>
This value is ignored in uncertainty measurement files. The entry is therefore
irrelevant.
<R n>
R is optional and followed by the reference impedance in Ω. If no entry is
made, R50 is implicitly assumed.
unc[s ( f )] unc[s ( f
i 11 i 21
is the i-th frequency and unc[ s
i
As extended absolute uncertainty ( k = 2 ) for the magnitude of reflection
parameters s and s
11
As extended uncertainties ( k = 2 ) in dB for the magnitude of transmission
parameters s and s
21
Query only
)] unc[s ( f )] unc[s
i 12 i 22
( f )] is the uncertainty of the S-parameters
jk i
22
12
........................................................................ 123
......................................................................124
.................................................................... 124
..................................................................... 124
CALCulate:FEED
Remote control commands
Querying measurement results
( f )]
i
before the measurement is initi-
123