Browser-Based User Interface - R&S NRP Series Getting Started

®
R&S NRP Series
For further details, see the user manual.
NRP Version Display
Displays version information of all installed, power measurement-relevant soft-
ware packages.
R&S NRP‑Z Uncertainty Calculator
Determines the expanded measurement uncertainty. The tool comes with a man-
ual (PDF) that is also available in the "Start" menu.
S-Parameter Update Multi
Helps loading an S-parameter table into the power sensor.
For further details, see the user manual.
Terminal
Low-level communication program for sending commands to the power sensor.
5.2

Browser-based user interface

Requires a power sensor with networking capabilities, a LAN power sensor.
With the integrated, browser-based graphical user interface of the LAN power
sensor, you can easily configure the most common settings and measure in the
provided measurement modes.
There is no installation required. The web user interface can be used with all devi-
ces and operating systems, including tablets and smart phones that are connec-
ted to the same network.
Required equipment
● R&S NRP LAN power sensor
● LAN cables
● PoE Ethernet switch or a non-PoE Ethernet switch and a PoE injector
● Device with a supported web browser installed:
Getting Started 1419.0170.02 ─ 16
Operating concepts
Browser-based user interface
35