Performing A Firmware Update; Browser-Based User Interface - R&S NRQ6 Getting Started

®
R&S NRQ6
3. Accept the license terms to continue with the installation.
4. Click "Next" and complete the installation process.
6.1.3.1

Performing a Firmware Update

The Firmware Update for NRP Family program is part of the R&S NRP Toolkit for
Windows. You can use the Firmware Update for NRP Family program to load new
firmware for the power sensors.
For further details, refer to the user manual.
6.2

Browser-Based User Interface

With the integrated, browser-based graphical user interface of the R&S NRQ6,
you can easily configure the settings and measure in the provided measurement
modes. Open a web browser on your controlling host and connect to the
R&S NRQ6. No extra installation is required.
Requirements
● Controlling host:
Getting Started 1178.3705.02 ─ 07
Operating Concepts
Browser-Based User Interface
41