Labels On The Product; Warning Messages In The Documentation - R&S NRP Series User Manual

®
R&S NRPxxS(N)
Never open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. If any part of the product is dam-
aged or broken, stop using the product. Contact Rohde & Schwarz customer service at
http://www.customersupport.rohde-schwarz.com.
Choosing the operating site
Only use the product indoors. The product casing is not waterproof.
Observe the ambient conditions such as altitude, operating temperature and climatic
loads; see the data sheet.
Meaning of safety labels
Safety labels on the product warn against potential hazards.

1.2 Labels on the product

Labels on the product inform about:
●
Personal safety
See
●
Environment safety
See
●
Identification of the product
See
Table 1-1: Labels regarding environment safety

1.3 Warning messages in the documentation

A warning message points out a risk or danger that you need to be aware of. The sig-
nal word indicates the severity of the safety hazard and how likely it will occur if you do
not follow the safety precautions.
User Manual 1177.5079.02 ─ 15
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
"Meaning of safety labels"
Table 1-1.
"Default hostname" on page 25.
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after the prod-
uct has come to the end of its service life.
For more information, see
Safety and regulatory information
Warning messages in the documentation
on page 10.
"Disposing electrical and electronic equipment" on page 175.
10