R&S NRP Series User Manual page 19

®
R&S NRPxxS(N)
nect the power sensor as described in
on page 15.
Connect the power sensor to the signal source.
4. On the computer, start a software application to view the measurement results.
See
3.7.1.2 R&S NRP‑Z5 sensor hub setup
The R&S NRP‑Z5 sensor hub (high-speed USB 2.0) can host up to four R&S
NRPxxS(N) power sensors and provides simultaneous external triggering to all con-
nected sensors.
Required equipment
●
1 to 4 R&S NRPxxS(N) power sensors
●
1 R&S NRP‑ZK6 cable per sensor
●
R&S NRP‑Z5 sensor hub with external power supply unit and USB cable
●
BNC cables to connect the trigger input and trigger output signals (optional)
Setup
1
Figure 3-2: Setup with an R&S NRP-Z5 sensor hub
User Manual 1177.5079.02 ─ 15
Chapter 5, "Operating
2
Chapter 3.4, "Connecting to a
concepts", on page 31.
4 5
3
Preparing for use
Connecting to a controlling host
DUT",
6
9
7
8
19