Table of Contents
Advertisement
Introduction
AQUATRAN 3/38 Operator's Manual
Testing Samples
The AQUATRAN 3/38 is designed measure the Water Vapor Transmission Rate of film samples. The
AQUATRAN 3/38 provides no capability for testing packages.
To test a film sample, it is prepared and mounted in a Test Cartridge. Both positions in the Test Cartridge
(referred to as the top and bottom) must contain a film or foil. The test cartridge is used to maintain the film
sample at the specified test conditions. For more information on testing Film Samples see Chapter 6.
1-6
Revision G
MOCON, Inc.
Advertisement
Table of Contents
