iCAP 7000 Series ICP-OES Spectrometer
'
2 Setting up the PC instrument network connection
If the PC is connected to a network, an
additional Ethernet port is required for
connection to the instrument. The ports are
configured differently and are not
interchangeable. To avoid confusion, the
Ethernet port on the motherboard should
be used for the instrument.
If the computer is connected to a network
the security settings need to be set by the
customer Network Administration.
2.1 Network Set-up
Windows 7: Open the Network
connections dialog (Start->Control Panel -
>Network & Internet->Network & Sharing
Centre->Change Adapter Settings)
2.2
Ethernet adaptor naming
Rename the dedicated instrument Ethernet
adaptor to "Instrument". Do this by right
clicking on the connection, select Rename
and enter "Instrument".
Page 3 of 36
Installation Details
Version 4301 460 00632