Change User Account Control Settings; Pc Configuration - Thermo Scientific iCAP 7000 Series Manual

iCAP 7000 Series ICP-OES Spectrometer
2.7 Change User Account
Control Settings
User Account Control Settings needs to be
changed to 'Never notify'.
(This enables you to edit the line library
and register the software with this version
of Qtegra).
Start->Control Panel>System and
Security>Action Center
2.8

PC configuration

2.8.1 Power settings
Before connecting the instrument to the
PC, ensure any PC power saving settings
are turned off.
This is changed from the Power Options
Dialog (Start->Control Panel>Power
Options) Click on Change plan settings
Advanced Power Settings must also be
disabled. For each tab ensure that the
power saving setting is set to Never.
Note: The power settings will
have to be set for each user who
uses Qtegra
2.8.2 Windows Automatic Updates
In Control Panel/System/Windows Update -
Switch off Automatic Updates.
Reboot the PC.
Page 6 of 36
User Account Off
PC Power Settings Off
Windows Updates Off
Installation Details
□
□
□
Version 4301 460 00632