iCAP 7000 Series ICP-OES Spectrometer
Create a manual installation test LabBook by:
Use the pull down menu to select the correct LabBook for the instrument being installed.
Press 'Create LabBook'
Note:- LabBooks can be created from blank Template, existing Templates, imported Templates
of appropriate configuration, or from existing LabBooks.
Note - The LabBooks loaded with Qtegra have parameters to
service performance tests. The performance test supplied with Qtegra should not
be used at this time.
Note - Unlike iTEVA a blank does not need to be analysed to calculate detection limits.
Page 27 of 36
LabBook Created
Installation Details
□
manually
run the
Version 4301 460 00632