Configuring The Sprint Valve (Icap 7600 Only) - Thermo Scientific iCAP 7000 Series Manual

iCAP 7000 Series ICP-OES Spectrometer

4 Configuring the Sprint valve (iCAP 7600 only)

For other systems miss this section, the autosampler should be connected later
Open the Sprint Valve Configurator
software.
This can be in the directory under
C:\Program Files (x86)\
Thermo\Qtegra\Sprint Valve
Configurator\Sprint_Valve_Config.
Place a shortcut on the Desktop.
The software will open with most options
greyed out
Note: Qtegra should not be connected to the auto sampler when performing the
next operation.
Press the Serial port auto detect icon.
Follow the displayed instructions.
Press OK.
Page 13 of 36
Installation Details
Version 4301 460 00632