Before You Start - Rinnai RDV2320MN/L Installation Manual

Before you start

Unpack the appliance and components and check for damage. DO NOT install any damaged
items. Check all components have been supplied, refer below, and that you have the correct gas
type.
Read these instructions to get an overview of the steps required before starting the installation.
Failure to follow these instructions could cause a malfunction of the appliance. This could result in
serious injury and/or property damage.
Novo DV inbuilt coaxial in timber frame (mock chimney)
9 Engine
9 Coaxial adpater
9 Zero clearance box
9 Outer frame
9 IR remote
1
Comes assembled on the fire
3
Supplied inside the fire
Novo DV inbuilt colinear in masonry
9 Engine
9 Colinear adpater
9 Masonry adapter frame
9 Outer frame
9 IR remote
1
Comes assembled on the fire
3
Supplied inside the fire
Coaxial / colinear flueing
Images are representative of some flueing options, components will be dependent on flue
configuration and installation.
4 | Novo DV inbuilt installation guide: 13748-C 03-22
1
1
2
Two are factory fitted on the fire, two are supplied in the accessory pack
1
1
2
Two are factory fitted on the fire, two are supplied in the accessory pack
9 Stainless steel gas pipe
9 Brass adapter
9 Aeration plates and screws
9 Log set and granules
9 Operation, and installation guides
9 Stainless steel gas pipe
9 Brass adapter
9 Aeration plates and screws
9 Log set and granules
9 Operation, and installation guides
2
3
2
3