Table of Contents
Advertisement
BEFORE YOU START
INSTALLATION REQUIREMENTS
This heater MUST be installed ONLY by an authorised person.
The installation MUST conform to local regulations.
The installation MUST also comply with the instructions supplied by Rinnai.
Service and removal MUST be carried out ONLY by an authorised person.
CERTIFICATION
The Rinnai RHFE 952 and RHFE 1253 Gas Fires have been certified by the Australian Gas Association.
The AGA Certification Number is shown on the appliance data plate.
No parts or functions should be modified or permanently removed from the heater.
Please keep these instructions in a safe place for future reference.
FLUE INSTALLATION MANUAL
These instructions are to be used in conjunction with the Rinnai "Power Flued Flamefire Space Heater Co-axial
Flue System Installation Manual" supplied with flue kits ASPDFK or ASPKIT03.
CARTON CONTENTS / ITEM CHECKLIST
The following table lists the components for the Rinnai RHFE 952 and RHFE 1253 Gas Fires. Ensure that all the
relevant components for the model being installed are present before proceeding.
DO NOT Install any damaged items. Check all components have been supplied.
IMPORTANT
6
9
Rinnai
8
10
7
18
1.
RHFE 952 / RHFE 1253 engine
2.
Remote control with batteries
3.
Screw pack
4.
Cable tie
5.
Frame mounting screws
6.
Operation & installation guides
7.
Two granule packs (both models)
+ one bag of wire wool (not shown)
8.
Gas connections
9.
Inner frame
10. Outer Frame
11. Mesh guard
12. Log set OR river stone set. -
Images shown are for the RHFE-
952 model, The RHFE-1253 log
set has an extra two logs (10 in
total), and the stone set contains
an extra 10 stones (40 in total)
RHFE 952/1253 OIM
Advertisement
Chapters
Table of Contents
Troubleshooting
