Flueing option: Mock chimney vertical
Coaxial flue with Duravent cowl
Straight vertical flueing
If doing a short vertical flue (no bends) for a single storey dwelling, the mock chimney vertical flue
kit 3.6 m (R3665) can be used otherwise the flue components can be ordered separately.
Flue pipe(s) or flue extension.
Roof cowl (R3651)
Flue elbow 45 ° (R3642), maximum number of bends is two.
High wind areas
If located in a particularly windy areas such as Wellington, coastal properties, or
elevated properties on hills etc., then a DV high wind vertical cowl protection kit (R3655)
is recommended. It is designed to wrap around the vertical flue cowl to reduce wind
entering the flue and causing flame disturbances. Refer p.31 for more information.
Max. 2m
Novo DV inbuilt installation guide: 13748-C 03-22 | 29