Before You Start - Rinnai RHFE1000 Installation Manual

Before you start

Unpack the appliance and components and check for damage. DO NOT install any damaged
items. Check all components have been supplied, refer table below, and that you have the
correct gas type.
Read these instructions to get an overview of the steps required before starting the installation.
Failure to follow these instructions could cause a malfunction of the appliance. This could result in
serious injury and/or property damage. There are also some sections in this guide that are crtical
to a successful installation, for example:
Preline instructions regarding combustible and non-combustible materials pages 7, 9, 29-35
•
• Cavity ventilation considerations
• Framing dimensions in order to centre the glass of the fire
Linear boxed dimensions
H
W
D
With the Linear engine comes the:
- Glass front
- Remote control (batteries included)
- Flue lock bracket and truss screws (x2)
- Operation and Installation guides
- Burn media installation guide
- Colour burn media placement sheet (attached to the glass frame)
- Commissioning sheet (in a plastic pouch inside the unit)
- Reducing flare
- Linear 800 FlameTech or standard log set (inside the engine)
The burn media for the Linear 1000 and 1500 models will come packaged separately
in one large box.
Flue components and accessory items are ordered separately.
Installer please note
The Linear carton has a unit protection cutout that can be fixed to the appliance to protect the
fire from damage, debris, and dust, until final commissioning can be completed.
4 | Linear installation guide 13563-H 08-19
Linear 800
Height 1156 mm
Width 1350 mm
Depth 530 mm
Weight 120 kg
Linear 1000 Linear 1500
931 mm 931 mm
1550 mm 2050 mm
530 mm 530 mm
125 kg 140 kg
page 12
pages 13-16