Before You Start - Rinnai Ember 600 Installation Manual

Before you start

Unpack the appliance and components and check for damage. DO NOT install any damaged
items. Check all components have been supplied and that you have the correct gas type.
Read these instructions to get an overview of the steps required before starting the installation.
Failure to follow these instructions could cause a malfunction of the appliance. This could result in
serious injury and/or property damage.
Ensure the flue termination will meet the required flue clearances as shown in AS/NZS 5601.1
before installation.
Item
ENGINE
23
The Ember engine comes with; remote control (batteries inserted), operation and installation guides, granule packs,
rockwool, crushed glass, vermiculite, flexible gas connection, and two spare halogen bulbs.
4-SIDED or 3-SIDED FRAME
ZERO CLEARANCE FRAME
A must have for mock chimney installations
as it gives automatic clearance to
combustibles and is critical for keeping the
installation
INFILL PANEL (if needed)
Infill panel only needed if the cavity is
slightly larger than the frame—panel
will cover the gap behind the fire and
the 3-sided frame.
700 MASONRY FRAME
Wider masonry frame for the 700,
designed to cover a larger cavity
opening.
BURN MEDIA
Option of a log or stone set. Ensure
you have the correct set before starting
as they are different for each model.
MASONRY FLUE COMPONENTS
Flexi flue components for a vertical or
horizontal chimney termination
MOCK CHIMNEY FLUE COMPONENTS
Flue components for a vertical or
horizontal termination
4 | Ember Installation Guide: 12890-F 06-21
square.
Masonry installation
Ember 600 Ember 700
 
 
 

 
 
Mock chimney installation
Ember 600 Ember 700
 
 
 
 
 