Table of Contents
Advertisement
Installation: Fire to flange connection
The below installation step is common to masonry and mock installations. IT IS CRITICAL to the
safe operation of the fire.
Once the fire has been screwed to the zero clearance box or masonry adapter frame, the front
face of the frame and the front flange of the fire should be pulled up hard against each other. There
are witness holes in the front flange of the fire to ensure this happens.
It is critical to ensure that the air and flue seals are correctly compressed. If there is a gap
present, there may not be a proper seal and performance could be affected.
WARNING
Fixing check
markers
Novo DV inbuilt installation guide: 13748-C 03-22 | 19
Advertisement
Table of Contents
