1. Using Christie Mystique, create the required warp file.
2. Using Mystique, upload the warp file to the projector.
3. On the projector touch panel, navigate to Image Settings > Warp File Setup.
4. To activate the warp file, find the file name in the Warp File list and select Activate.
If you no longer require a warp file, remove it by selecting Image Settings > Warp File
Setup. Find the warp file in the list and select Delete.
CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4435-RGB, CP4440-RGB, CP4450-RGB, CP2420-Xe, CP4420-Xe
020-103073-06 Rev. 1 (03-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
Adjusting the image size and position
79