Christie CineLife+ CP4415-RGB User Manual page 66

3. Complete these fields:
Field Name
Name
Input Type
3D Sync Input Mode
ILS File
2D Light Source File
3D Light Source File
2D MCGD File
3D MCGD Left Eye File
TCGD File
Screen File
Gamma File
3D File
Source File
Christie Pureformity
™
Color Correction File
Warp File
4. Select Save.
CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4435-RGB, CP4440-RGB, CP4450-RGB, CP2420-Xe, CP4420-Xe
020-103073-06 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Description
Channel name
Select IMB.
For third-party IMBs, specifies how 3D input data is encoded.
• 2D Mode (Default)—No 3D synchronization is applied.
• 3D Frame Interleaved—For input that contains left-eye data followed by
right eye data.
• 3D Frame Interleaved Inverted—For input containing right-eye data
followed by left-eye data.
• 3D White Line/Blue Line—For input including metadata describing the 3D
encoding.
• 3D White Line/Blue Line Inverted—For inverted input including metadata
describing the 3D encoding.
• 3D Line Interleaved—The left-eye and right-eye data are sent on
alternating lines.
3D Sync Input Mode is not required when using the Christie IMB. For GDC IMB
devices, the recommended setting is 3D Line Interleaved.
ILS file associated with the channel.
2D light source file associated with the channel. Any changes made to the file
settings are applied to all channels using this file.
3D light source file associated with the channel. Any changes made to the file
settings are applied to all channels using this file.
Measured Color Gamut Data file associated with the 2D image.
Measured Color Gamut Data file associated with the left 3D image.
Target Color Gamut Data file associated with the channel.
Screen type, masking, cropping, and lens settings for the channel.
The gamma correction required for the proper tonal range of the source
material.
3D settings file associated with the channel.
The resolution and aspect ratio for the channel.
The color correction file associated with the channel.
Bypass (Default)
Warp file associated with the channel.
Bypass (Default)
Working with channels
66