Adding A Channel For Sdi Input - Christie CineLife+ CP4415-RGB User Manual

Adding a channel for SDI input

Create a channel to store customized projector settings for input devices connected to the SDI port.
1. In the left navigation menu, select Channel Setup.
2. Select + Add Channel.
3. Complete these fields:
Field Name
Name
Input Type
Data Format
Scan Type
3D Sync Input Mode
Color Space
ILS File
2D Light Source File
3D Light Source File
2D MCGD File
3D MCGD Left Eye File
CineLife+ User Guide–CP4415-RGB, CP4420-RGB, CP4435-RGB, CP4440-RGB, CP4450-RGB, CP2420-Xe, CP4420-Xe
020-103073-06 Rev. 1 (03-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
Description
Channel name
Select the input signal sources from one of the following:
• SDI - 1
• SDI - 2
• SDI - 3
• SDI - 4
• SDI - Dual-Link (1,2)
• SDI - Dual-Link (3,4)
• SDI - Quad
Bit-depth, sampling format, and color space of the input signal are
automatically determined from the metadata carried in the source.
Auto (Default)
Determines the input scanning format. Select one of the following:
• Auto (Default)—The scanning format of the input signal (interlaced or
progressive) is automatically determined from the metadata carried in the
source or by measuring scanning parameters of the source.
• Progressive—Forces the input signal scanning format to progressive,
overriding any metadata in the input signal.
Specifies whether a specific frame of input data has left-eye or right-eye data.
Select one of the following:
• Auto (Default)—The left-eye/right-eye 3D-sync information is
automatically determined from the metadata carried in the source or from
the specific input type selection.
• 2D mode—Forces the input signal to be interpreted as a 2D signal,
overriding any metadata in the input signal.
Method of color decoding for the current source.
ILS file associated with the channel.
2D light source file associated with the channel. Any changes made to the
settings are applied to all channels using this file.
3D light source file associated with the channel. Any changes made to the
settings are applied to all channels using this file.
Measured Color Gamut Data file associated with the 2D image.
Measured Color Gamut Data file associated with the left 3D image.
Working with channels
67