Applications; Description - Texas Instruments SimpleLink CC2652PSIP Manual

CC2652PSIP
SWRS263A – FEBRUARY 2021 – REVISED JUNE 2022

2 Applications

• 2400 to 2480 MHz ISM and SRD systems
• Building automation
– Building security systems –
electronic smart lock,
garage door system,
– HVAC – thermostat,
sensor, HVAC system
– Fire safety system –
fire alarm control panel (FACP)
– Elevators and escalators –
control panel for elevators and escalators
• Industrial transport –

3 Description

The SimpleLink ™ CC2652PSIP is a System-in-Package (SiP) certified module, multiprotocol 2.4 GHz wireless
microcontroller (MCU) supporting Thread,
smart objects (6LoWPAN), proprietary systems, including the TI 15.4-Stack (2.4 GHz), and
multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The device is optimized for low-power
wireless communication and advanced sensing in
portable electronics, home theater &
features of this device include:
• Small 7-mm x 7-mm certified system-in-package module 2.4GHz with integrated DCDC components, balun,
and crystal oscillators
• Wide flexibility of protocol stack support in the
(SDK).
• Coin-cell operation at +10 dBm with transmit current consumption of 33 mA.
• Longer battery life wireless applications with low standby current of 1 µA with full RAM retention.
• Industrial temperature ready with lowest standby current of 11 µA at 105 ⁰C.
• Advanced sensing with a programmable, autonomous ultra-low power
wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1 µA system
current.
• Low SER (Soft Error Rate)
markets with always-on SRAM parity against corruption due to potential radiation events.
• Dedicated software controlled radio controller (Arm
capability to support multiple physical layers and RF standards.
• Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth
(-103 dBm for 125-kbps LE Coded PHY).
The CC2652PSIP device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi
Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development
environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the
SimpleLink™ platform enables you to add any combination of the portfolio's devices into your design, allowing
100 percent code reuse when your design requirements change. For more information, visit
platform.
PART NUMBER
CC2652PSIPMOTR
(1) For the most current part, package, and ordering information for all available devices, see the Package Option Addendum in
13, or see the TI website.
1
See RF Core for additional details on supported protocol standards, modulation formats, and data rates.
2 Submit Document Feedback
1
motion detector,
door and window sensor,
gateway
wireless environmental
controller, gateway
smoke and heat detector,
elevator main
asset tracking
Zigbee
entertainment, and
FIT (Failure-in-time) for long operation lifetime with no disruption for industrial
Device Information
(1)
Product Folder Links:
• Factory automation and control
• Medical
• Communication equipment
– Wired networking
access points,
router
• Personal electronics
– Portable electronics
– Home theater & entertainment
speakers,
– Gaming –
– Wearables (non-medical)
smart clothing
® , Bluetooth ® 5.2 Low
building security systems, HVAC, medical,
connected peripherals
SimpleLink™ CC13xx and CC26xx Software Development Kit
® ®
Cortex -M0) providing flexible low-power RF transceiver
PACKAGE
QFM (73)
CC2652PSIP
– wireless LAN or Wi-Fi
edge router , small business
– RF smart remote control
– smart
smart display, set-top box
electronic and robotic toys
– smart
Energy, IEEE 802.15.4, IPv6-enabled
wired
markets. The highlighted
Sensor Controller CPU with fast
®
® , Bluetooth Low
SimpleLink™ MCU
BODY SIZE (NOM)
7.00 mm × 7.00 mm
Copyright © 2022 Texas Instruments Incorporated
www.ti.com
trackers,
concurrent
networking,
Low Energy
Section