Texas Instruments SimpleLink CC2652PSIP Manual page 40

CC2652PSIP
SWRS263A – FEBRUARY 2021 – REVISED JUNE 2022
There is a 4-KB ultra-low leakage SRAM available for use with the Sensor Controller Engine which is typically
used for storing Sensor Controller programs, data and configuration parameters. This RAM is also accessible by
the system CPU. The Sensor Controller RAM is not cleared to zeroes between system resets.
The ROM includes a TI-RTOS kernel and low-level drivers, as well as significant parts of selected radio stacks,
which frees up flash memory for the application. The ROM also contains a serial (SPI and UART) bootloader that
can be used for initial programming of the device.
40 Submit Document Feedback
Product Folder Links: CC2652PSIP
www.ti.com
Copyright © 2022 Texas Instruments Incorporated