Get The Enabled / Disabled State Of The External Input "Stop Trigger; Set The Intensity Of The Display Backlight - Image Engineering LED-Panel V5 User Manual

With the function "LED-Panel.exe -setStopTrigger <enable>," it is possible to activate or
deactivate the external (wired) input "Stop Trigger."
Parameters
<enable>
0
1
Example
LED-Panel.exe -setStopTrigger 1
After executing this command, the external input "Stop Trigger" will be enabled.

6.2.18 Get the Enabled / Disabled State of the external input "Stop Trigger"

Function
getStopTrigger
Description
After executing the command "LED-Panel.exe -getStopTrigger," the device returns the current
activation state of the external input "Stop Trigger."
Return values
Return value
0
1

6.2.19 Set the Intensity of the Display Backlight

Function
setDisplayBrightness <XXX>
Description
With the function "LED-Panel.exe -setDisplayBrightness <XXX>," the backlight illumination of
the LCD display light can be changed in 1% steps from 0% to 100%.
Image Engineering
Description
disable the input "Stop Trigger"
enable the input "Stop Trigger"
Table 6
Description
digital input "Stop Trigger" disabled
digital input "Stop Trigger" enabled
Table 7
Seite 36 von 45