Get The Intensity Of The Led Array (Led-Panel V5 Only) - Image Engineering LED-Panel V5 User Manual

6.2.32 Get the Intensity of the LED-array (LED-Panel V5 only)
Function
getLedBrightness
Description
With the function "LED-Panel.exe -getLedBrightness," it is possible to read the intensity of the
LED array.
Return Parameters
After executing the function "LED-Panel.exe -getLedBrightness," the device will return a one-,
two- or three-digits value of the LED-array brightness in counts.
For instance:
Return value 0 means that the LED array is turned OFF.
Return value 100 indicates that the intensity of the LED array is 100%.
Seite 43 von 45
Image Engineering