Get Leds Switching Time; Start Measurement; Stop Measurement - Image Engineering LED-Panel V5 User Manual

6.2.6 Get LEDs Switching Time

Function
getTime
Description
With the function "LED-Panel.exe -getTime," it is possible to read the switching time of the
device.
Return parameters
After executing the command "LED-Panel.exe -getTime," the device will return the cycle
duration in seconds or the index of the set time in case of exposure mode.

6.2.7 Start Measurement

Function
start
Description
"LED-Panel.exe -start" starts the measurement, ignoring the camera trigger input from the
camera microswitch.

6.2.8 Stop Measurement

Function
stop
Description
"LED-Panel.exe -stop" stops the measurement without resetting the LEDs.
Image Engineering
Seite 31 von 45